October 17-21 2022 | Singapore
Menu
October 17-21 2022 | Singapore
Papers ready for journal publication will be directly published in a special issue of IEEE Transactions on Visualization and Computer Graphics (TVCG). Paper quality versus length will be assessed according to a contribution-per-page judgment.
Papers are also eligible for one of a number of best paper awards.
All materials will be submitted electronically through the Precision Conference website at: PCS
If you already have an account with that system, please use that account to submit your materials. Otherwise, create a new account. As part of the submission, you will be able to choose a major topic and a list of associated keywords.
After your submission the following process takes place:
ISMAR is a high-quality conference with a competitive submission process. For information on past conferences, including acceptance rates and best paper awards, see the http://ismar.net website. ISMAR has a rigorous reviewing process. Every submitted paper is subjected to this process.
ISMAR has two tiers of reviewers: the program committee members, and the external reviewers. The program chairs first assign each paper to a primary reviewer and a secondary reviewer from the program committee. The primary reviewer then assigns two external reviewers and the secondary reviewer assigns one external reviewer; the secondary reviewer and external reviewers write reviews while the primary reviewer oversees the process, checks review quality and writes the meta-review. The primary reviewer may recommend that a paper that is exceptionally uncompetitive or noncompliant to the submission rules may be desk rejected; such papers are also examined by the program chairs before the decision to desk reject is taken.
The initial reviews are released to paper authors. After receiving reviews, authors may optionally submit a rebuttal to address the reviewers’ comments. The author rebuttal is optional and is meant to provide an opportunity to rebut factual errors or to supply additional information requested by the reviewers. It is not intended to add new contributions (theorems, algorithms, experiments) that were not included in the original submission. Rebuttals should not include links to external pages/sites (e.g., to provide additional rebuttal materials beyond the 6000 character limit).
Reviewers will read the rebuttals and anonymously discuss the papers. Reviewers are asked to provide recommendations based on the rebuttal, other reviews, and discussion. An initial recommendation and a meta-review for each paper will be determined by the primary reviewer for further discussion by the program chairs.
For conditionally accepted papers, the meta-review lists conditions that the author must meet in order for the paper to be accepted. Authors may of course choose to withdraw their paper rather than meet the conditions. For each conditionally accepted paper, the program committee assigns a shepherd, who works with the authors to see that the conditions for acceptance are successfully applied to the paper. After the revised paper is submitted, the shepherd, the program chairs, and the TVCG representative make the final decision of accept or reject.
Finally, the authors of accepted papers prepare a final, camera-ready version. Note that TVCG and ISMAR Conference papers have different typographical styles.
The program committee creates a list of the best accepted papers. There is no set size limit for this list. The program chairs then forward this list to the Best Paper Awards Committee, which is organized separately from the program committee.
Also see the Reviewing Guidelines for more information.
Upload the final version to the same site where the original paper was submitted: https://new.precisionconference.com/ismar
Use the “Final Submission Form” to provide your final version and any supplementary material, such as video files.
In the preparation of the final submission, follow the camera-ready instructions.
Ensure that you are using the correct formatting and submit the IEEE copyright form. Otherwise, your contribution might not be included in the proceedings.
All accepted papers will be presented orally at the conference. More details will be provided at the time of acceptance.
A good ISMAR submission will result in both a respectable document for the proceedings and a good conference talk. As an author, you should ask yourself the following questions while writing your paper. Submissions that do not provide good answers to these questions are unlikely to be accepted.
The most common motivation for publishing a paper is to present a solution to a problem. When doing so, try to state all your constraints and assumptions. This is an area where it can be invaluable to have someone who is not intimately familiar with your work read the paper. Include a crisp description of the problem in the abstract and try to suggest it in the title. Note that the program chairs depend almost completely on the abstract and title when they determine which program committee member to assign to the paper.
ISMAR papers often focus on a certain aspect of Mixed and Augmented Reality systems. The following list includes some example topics, but does not represent an exhaustive list of all topics. We welcome any new idea beyond the usual range of areas.
What are the relevant published works in your problem area? What deficiencies in their approaches are you trying to overcome? How does the new approach differ from previously published results? Don’t expect the reviewers to know this information without telling them in the paper, as they are unlikely to remember the precise details of all the relevant literature. Make specific comparisons between your work and that described in the references; don’t just compile a list of vaguely related papers. What are the limitations of your work and is the future work still to be addressed?
Based on your problem statement, what did you accomplish? You are responsible for arguing that the problem is sufficiently addressed. Include pictures, statistics, or whatever is required to make your case. If you find this part of the paper difficult to write, perhaps the work is not yet finished and the paper should be deferred until next year. (And, perhaps, submitted as a poster this year).
The following describes some typical evaluation methods for different kinds of papers. This list is not exhaustive, but provides some hints as to what can help to present your contribution.
What are your new ideas or results? If you don’t have at least one new idea, you don’t have a publishable paper. Can your results be applied anywhere outside of your project? If not, the paper is probably too special-purpose for ISMAR. On the other hand, beware of trying to write a paper with too large a scope.
The question that generates a large amount of discussion within the program committee to determine whether a paper is complete. If the paper presents an algorithm or technique, an experienced practitioner in the field should be able to implement it using the paper and its references. If the paper claims to present a faster or more efficient way of implementing an established technique, it must contain enough detail to replicate the experiment on competing implementations. When you quote numbers, be sure that they are not misleading—state clearly whether they were measured, simulated, or derived, and how you did the measurements, simulations, or derivations. For example, CPU time measurements are meaningless unless the reader is told the machine and configuration on which they were obtained.
Many large, poorly written papers contain a good paper trying to get out. It is the author’s responsibility, not the reviewer’s, to discover this paper and turn it into the submission. If you have addressed a single, practical problem, don’t try to generalize it for the purposes of publication. If you have a formal theory or elaborate architecture, don’t include all the vagaries of the implementation unless they are critical to the utility of the theory. Don’t include the contents of your user’s manual; instead, describe the model or functionality achieved. You should assume your audience has a working knowledge of user-interface development and access to the major journals in computer science, electrical engineering, and psychology. A short conference paper can only present a few concise ideas well.
While ISMAR papers are judged primarily as technical papers, some consideration is given to how suitable the topic is for a conference presentation. Think of how you would present your ideas, and how big the audience is likely to be. Papers that have a small number of concisely stated new ideas and that are visually interesting tend to appeal to a large audience and be easy to present. As recent conferences clearly show, these criteria do not eliminate papers that have taxonomies or strong theoretical content, or appeal to a specialized audience, if they contain significant new ideas.
A video can be very helpful for communicating technical results, especially when the paper discusses an interaction technique. However, do not try to save space in the paper by putting essential information into the video. The paper must stand on its own.
All information, including information in figures, charts, tables, etc., should be available to readers who consume it in different ways. For example: some of us cannot see color, some use high contrast displays, and some listen to the content instead of seeing it. CHI 2021 has useful information on making a paper accessible.
Use “he” when referring to men or boys. Use “she” when referring to women or girls. Avoid phrases such as “he/she” or “he or she” when a gender is not clearly known. Instead use “they” as a gender-neutral pronoun. When referencing a profession, use the gender-neutral form. For example, use fire fighter, police officer, or worker instead of fireman, policeman, or workman. See this excerpt of the Chicago Style for more information about gender-neutral pronouns.
You can also find the full list of papers previously published at ISMAR in the IEEE Digital Library (IEEE Xplore). Furthermore, the ismar.net website lists past best paper awards, which are good examples of great ISMAR papers.
No. While ISMAR has helped to bring to the world key works on real time 3D tracking using vision methods (and we want to keep that happening), Mixed and Augmented Reality are concepts that go far beyond only tracking in 3D! At ISMAR 2022 we are highlighting the interest in work that goes beyond tracking. Issues on usefulness of AR, learning, training, therapy, rehabilitation, virtual analytics, entertainment, context, behavior, and object recognition together with other wearable sensors using computer vision, sensor networks and new types of onboard and external sensing technologies become very relevant to augment our world. VR papers will also be considered regardless of their relevance to AR/MR.
This document was adapted by the 2022 Journal Paper Chairs: Guillaume Moreau, Joseph Gabbard, Daisuke Iwai and Lili Wang. The document was obtained from Daisuke Iwai, Denis Kalkofen, Guillaume Moreau, and Tabitha Peck., who inherited it from Shimin Hu and Stefanie Zollmann, Wolfgang Broll, Holger Regenbrecht, J. Edward Swan II, Wolfgang Broll, Hideo Saito, based on Walterio Mayol, Christian Sandor, and Rob Lindeman, based on significant materials created by Ron Azuma on how to write a successful ISMAR paper and how to be a successful Program Chair, also based on the 2011 UIST Author Guidelines edited by Maneesh Agrawala and Scott Klemmer (using material provided by Saul Greenberg), who inherited it from François Guimbretière, who inherited it from Michel Beaudouin Lafon, who inherited it from Ravin Balakrishnan and Chia Shen, who inherited it from Ken Hinckley and Pierre Wellner, who inherited it from Dan Olsen, who inherited it from Steve Feiner, who inherited it from Joe Konstan, who inherited it from Michel Beaudouin Lafon, who inherited it from Ari Rapkin, who inherited it from Beth Mynatt, who inherited it from George Robertson, who inherited it from Marc H. Brown, who inherited it from George Robertson, who got lots of help on it from Steve Feiner, Brad Myers, Jock Mackinlay, Mark Green, Randy Pausch, Pierre Wellner, and Beth Mynatt.